Komatsu — ADJUSTMENT

MAINTENANCE CHECKING AND ADJUSTING PARKING BRAKE During running-in, check efficiency of parking brake after the first 500 hours of operation. CHECK Check condition: Tire pressure as prescribed. Dry, compact road surface, with approximately 11° 20’ (1/5) grade. Machine in operating conditions. 1. Start the engine. 2. Align the machine in a straight traveling position and proceed up the slope with 1/5 grade, with bucket empty. 3. Stop the machine by applying brake pedal, shift directional control lever to neutral position (N), and stop the engine. 4. Apply the parking brake (lock position), slowly release the brake pedal, and make sure that the machine does not move. ADJUSTMENT 1.

With engine off, release the brake lever and rotate lever end (1) by giving it 2 or 3 counter-clockwise turns. 2. Start the engine and check again. 3-62 WB140-2N, WB150-2N