OPTIONAL ATTACHMENTS BACKHOE TELESCOPIC ARM The option of extending the backhoe arm makes it possible to perform operations outside of the normal backhoe radius. This would be for grading, ditch cleaning and using optional attachments. DESCRIPTION AND CONTROL This structure is designed with an external hollow arm (1) within the inner arm (2) supporting the equipment slides on a “V” shaped series of guides. This arm is extended or retracted hydraulically. The system controlling the telescopic arm movement is controlled by a pedal (3) positioned in the operators compartment. When the pedal is rocked forward, the arm is extended, when the pedal is rocked backward the arm is retracted.
Remark When the arm is extended, the breakout force of the backhoe is reduced when lifting loads. “OPERATING THE BACKHOE” on page 2-38. SAFETY LOCKS When traveling or operating the front end loader, the safety clip (4)must be inserted into the telescopic arm and pined in place with the pin(5). When using a hammer, compactor, or similar attachments contact your Komatsu Dealer prior to using any attachment with the telescopic arm. To install the safety lock, retract the arm fully, remove the pin and clip from its holding place and insert it into the holes cut in the arm boss. 5-10 WB140-2N, WB150-2N