hitachi — REMOVE AND INSTALL TRACK

UNDERCARRIAGE / Track CAUTION: Special tool (ST 1532) when removing and installing master pin weight: 150kg (330 lb) 12. Attach a nylon sling to screws (9) (2 used) in special tool (ST 1532) when removing and installing master pin and hoist special tool. Move special tool (ST 1532) when removing and installing master pin to the mounting position for master pin (3). Adjust length of the nylon sling and align adapter (14) and pusher (12) in special tool (ST 1532) when removing and installing master pin with master pin (3). IMPORTANT: Align the centers of adapter (14) and pusher (12) with that of master pin (3).

If the centers are not aligned and master pin (3) is removed, special tool (ST 1532) when removing and installing master pin may be deformed or damaged. 13. Align the end of master pin (3) with the hole of adapter (14) in special tool (ST 1532) when removing and installing master pin. Adjust hydraulic cylinder (8) and push pusher (12) to the end of master pin (3). Check for the installation conditions of master pin (3) and special tool (ST 1532) when removing and installing master pin. 14. Extend hydraulic cylinder (8) and push out master pin (3). W1J7-03-07-003 NOTE: When the stroke of hydraulic cylinder (8) is insufficient, retract hydraulic cylinder (8) once.

Add extension (15) between extension (15) and pilot (17) in order to extend the stroke. When extensions (15) (3 used) are added and the stroke of hydraulic cylinder (8) is insufficient, move the positions to install nuts (10, 16) (2 used for each) to the hydraulic cylinder (8) side. W1J7-03-07-004 W1J7-03-07-005 W3-7-6 Nylon Sling B 1532 Nylon Sling ST 1532 9 14 12 3 ST 1532 Detail B 12 ST 1 Detail B ST 1 532 16 10 9 8 17 15 (Inside 17 (Inside )