UNDERCARRIAGE / Track 5. After the track is attached to front idler (4), raise the machine. Remove the block. Lower the machine. IMPORTANT: Insert the tapered side of guide pin (19) first. 6. Secure shoe (5) of both ends of the track by using a chain block. Adjust the chain length by using the chain block and align with the master pin (3) mounting hole on track link (6). Insert guide pin (19) into the master pin (3) mounting hole. 7. Install extension (15), pilot (17), pusher (12) and master pin (3) to special tool (ST 1532) when removing and installing master pin. 4 W1J7-03-07-007 5 5 W1J7-03-07-002 Chain Block NOTE: Master pin (3) is symmetrical.
Master pin (3) can be installed to both directions. 8. Install guide (18) to master pin (3). W1J7-03-07-006 ST 1532 W3-7-9 19 18 12 17 6 15 3 19 18 12 17 3 15