hitachi — REMOVE AND INSTALL TRACK

UNDERCARRIAGE / Track 15. Remove extension (15), pilot (17), pusher (12) and guide (18) from special tool (ST 1532) when removing and installing master pin. 16. Remove the hoses (2 used) of electric pump (ST 1531) from hydraulic cylinder (8). If special tool (ST 1532) when removing and installing master pin is disassembled and stored, disassemble according to the assembling procedures on W3-7-5 in reverse. 19 17 15 W1J7-03-07-006 9 10 8 NOTE: Put the matching marks on screw (9) and nut (10) before removing screws (9) (2 used) and nuts (10) (2 used). 9 10 W1J7-03-07-005 Hose W3-7-12 18 12