hitachi — REMOVE AND INSTALL FRONT ATTACHMENT

FRONT ATTACHMENT / Front Attachment Installation CAUTION: Standard front attachment weight: 8000 kg (17650 lb) 1. Hoist the front attachment. Align the boom foot with the mounting hole of main frame. Insert the shim into the left and right sides of boom foot and adjust the clearance between the boom foot and main frame within 1.5 mm. Shim thickness: 3.2 mm, 2.3 mm or 1.0 mm CAUTION: Metal fragments may fly off when a hammer is used. Wear necessary protection, such as goggles, hard hats, etc in order to prevent personal injury. 2. Install boom foot pin (15). Install plate (14) with bolts (13) (2 used). W157-04-01-004 : 400 N m (41 kgf m, 295 lbf ft) 3.

Install hoses (11) (4 used) with socket bolts : 30 mm 13 (12) (16 used). 15 14 : 140 N m (14 kgf m, 103 lbf ft) : 12 mm W105-04-01-007 NOTE: Steps 4 to 6 are for the machine attached with the auto lubrication device (optional). 4. Install lubrication hose (7). : 19 mm : 30 N m (3.0 kgf m, 22 lbf ft) 5. Install clip (9) with bolt (8). 7 8 : 50 N m (5.1 kgf m, 37 lbf ft) 6. Secure lubrication hose (7) to hose (11) in the outside with clip bands (10) (2 used). : 17 mm 9 12 10 M1J1-07-049 11 11 W4-1-5 Boom Foot Positio Mounting Hole of Main Frame Boom Foot Positio n Mounting Hole of Main Frame