FRONT ATTACHMENT / Front Attachment CAUTION: Boom cylinder weight: 430 kg (950 lb) IMPORTANT: Fill hydraulic oil to specified level. Start the engine. Check for any oil leaks of each hose. 7. Hoist boom cylinder (1). Start the engine. Extend the boom cylinder and align with the pin hole. 1 CAUTION: Metal fragments may fly off when a hammer is used. Wear necessary protection, such as goggles, hard hats, etc in order to prevent personal injury. 8. Install pin (6) and install boom cylinder (1) to both sides. 9. Install washer (3) and stopper (4) and tighten with bolts (5) (4 used). (2 places on both right and left) W157-04-01-006 : 400 N m (41 kgf m, 295 lbf ft) 10.
Install lubrication hose (2) to the rod side of boom cylinder (1). : 30 mm : 30 N m (3.0 kgf m, 22 lbf ft) 11. Install the connector to the boom light. : 19 mm W166-04-01-005 2 1 W105-04-01-002 W4-1-6 1 3 4 5 6 1 1