FRONT ATTACHMENT / Cylinder 17. Install steel ball (14) to nut (22). Install set screw (13). 11. Install cylinder head (3) to cylinder rod (1). Special tool when installing cylinder head: Arm cylinder: ST 8023 Bucket cylinder: ST 8022 IMPORTANT: Install cushion seal (15) with the slit facing to the piston side. 12. Install cushion seal (15) to cylinder rod (1). : 100 N m (10 kgf m, 74 lbf ft) 18. Crimp set screw (13) at two places on the outer surface by using a punch in order not to loosen. : 8 mm NOTE: Cushion seal (15) is not equipped for the bucket cylinder. IMPORTANT: Install cushion bearing (16) with the chamfered side facing to the cylinder head (3) side. 13.
Install cushion bearing (16) to cylinder rod (1). 14. Install piston (17) to cylinder rod (1). 15. Install shim (21) and nut (22) to cylinder rod (1). CAUTION: Cylinder tube (23) weight: Arm cylinder: 265 kg (585 lb) Bucket cylinder: 170 kg (375 lb) 19. Secure cylinder tube (23) horizontally on a workbench. CAUTION: Cylinder rod (1) weight: Arm cylinder: 275 kg (606 lb) Bucket cylinder: 170 kg (375 lb) IMPORTANT: Align with the center of cylinder tube (23) and insert the cylinder rod (1) assembly straightly in order not to damage the rings. 20. Insert cylinder rod (1) into cylinder tube (23). 21. Install cylinder head (3) to cylinder tube (23) and tighten with socket bolts (4) (8 used).
Arm cylinder NOTE: Shim (21) is not equipped for the bucket cylinder. 16. Tighten nut (22). Special tool when turning nut: Arm cylinder ST 3283: 135 mm (5.3 in) : 27300 N m (2780 kgf m, 20135 lbf ft) Bucket cylinder ST 7213: 130 mm (5.1 in) : 20900 N m (2130 kgf m, 15415 lbf ft) : 22 mm : 1560 N m (160 kgf m, 1150 lbf ft) Bucket cylinder : 1140 N m (116 kgf m, 840 lbf ft) : 19 mm W4-2-27