Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

3.6 OIL FILTER ADAPTOR 3.6.5 Installation of Oil Filter Adaptor Install oil filter adaptor as follows: NOTICE: Failure to tighten oil filter adaptor mounting bolts to the required torque may lead to a loss of lubricating oil during engine operation. Inadequate lubrication can result in severe engine damage. FIRE To avoid injury from fire, contain and eliminate leaks of flammable fluids as they occur. Failure to eliminate leaks could result in fire. 1. Install the oil filter adaptor to the cylinder block and fasten as follows: [a] Torque the four M10 mounting bolts on current two-element oil filter adaptor to 58-73 N·m (43-54 lb·ft).

[b] Torque the six M8 mounting bolts on former three-element oil filter adaptor to 30-38 N·m (22-28 lb·ft). 2. Install full-flow oil filter(s). Refer to section 14.6.12. 3. Refer to section 12.3 for verification of proper oil filter adaptor installation. (Rev. 2005) All information subject to change without notice. 3-40 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION