Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 3.12.2 Removal of Ventilating System Precleaning is not necessary. Remove ventilating system as follows: 1. Remove the valve cover. Refer to section 1.6.2 for one-piece, refer to section 1.6.3 for two-piece, and refer to section 1.6.5 for three-piece rocker cover. 2. If the engine is equipped with a gear case cover breather, remove as follows: [a] Remove the five bolts that secure the breather-oil fill housing to the gear case cover. See Figure 3-45. Figure 3-45 Breather-Oil Fill Housing Bolt Location All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 3-85