Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 3. If the engine is equipped with a breather mounted on the housing, remove as follows: [a] Remove the three screws, baffle, and end retainer on the breather housing. See Figure 3-47. 1. Two-piece Valve Rocker Cover 6. Baffle 2. Retainer Clip 7. Retainer 3. Wire Mesh Element 8. Rocker Cover Cap 4. One-piece Rocker Cover 9. Seal 5. Screws 10. Breather Housing Figure 3-47 Breather Housing-Mounted Breather [b] Remove the breather housing seal and wire mesh element. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 3-87