4.1 COOLING SYSTEM OVERVIEW An OEM supplied radiator along with a factory installed and thermo-modulated fan are used to effectively dissipate the heat generated by the engine. A centrifugal-type water pump is used to circulate the engine coolant. Two full blocking-type thermostats are used in the water outlet passage to control the flow of coolant, providing fast engine warm-up and regulating coolant temperature. Listed in Table 12-2 are the normal cooling system operational parameters. The pressurized engine coolant is drawn from the lower portion of the radiator by the water pump and is forced through the oil cooler and into the cylinder block. See Figure 4-2.
Figure 4-2 Coolant Flow Schematic for Vehicle Engines (Rev. 2005) All information subject to change without notice. 4-4 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION