Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

4.2 WATER PUMP (GEAR-CASE MOUNTED - 1991 AND LATER) (GCM) 2. Install a new oil seal into the water pump housing from the front (gear side). See Figure 4-16. Figure 4-16 Oil Seal Positioning (GCM) NOTICE: The contact surface of the oil seal is coated with a special sealant. Do NOT remove this sealant before installing the oil seal. If sealant is removed, leakage can occur. 3. Place the small end of J–35988–1 (part of tool set J–35988–C) into the water pump housing until it contacts the oil seal. See Figure 4-17. Figure 4-17 Oil Seal Installation (GCM) (Rev. 2005) All information subject to change without notice. 4-18 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION