5.1 FUEL 5.1.1 Fuel Lubricity Fuels such as those containing kerosene and jet fuel and some low sulfur fuels have characteristics which may cause operational concerns in some engine designs. The fuel injection systems used on VM and natural gas Detroit Diesel manufactured engines has demonstrated trouble-free operation on a wide variety of fuels without the need for supplemental additives. 5.1.2 Biodiesel Fuels Biodiesel fuels may be produced from a wide variety of sources and may be used in all DDC engines provided (1) they are derived from soy methyl ester (SME) and/or rape methyl ester (RME) and (2) are blended to a maximum of 20% by volume in diesel fuel.
The resulting blend must meet the properties found in the Lubricating Oil, Fuel, and Filters publication 7SE270. Although such blends purport to reduce exhaust emission particulates, they increase the nitrogen oxides in engine exhaust. They also tend to have poorer thermal stability and may deteriorate engine oil Totla Base Number (TBN) more rapidly than wholly petroleum-based diesel fuels. These fuel blends have not been fully evaluated relative to diesel fuel system durability or engine oil effects. (Rev. 2005) All information subject to change without notice. 5-4 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION