8.6 DDEC IV VARIBLE PRESSURE OUTPUT DEVICES 8.6 DDEC IV VARIBLE PRESSURE OUTPUT DEVICES DDEC IV engines use two VPODs which control the VNT and EGR valve. During engine EGR operation, the VPODs provide modulated air pressure to the pneumatic actuators which change the position of the VNT vanes and the position of the EGR valve. 8.6.1 Removal of Variable Pressure Output Devices Removal steps are as follows: 1. Disconnect the air line (7) fitting from the VPODs (6) and VNT actuator (8). See Figure 8-42. 1. Bolt 3. EGR Valve Assembly 5. Clamps 7. Air Line 2. Air Line Fitting 4. Air Line 6. VPODs 8. VNT Actuator Figure 8-42 VPODs Air Supply Lines and Related Parts 2.
Disconnect the air line (4) fittings from the EGR valve assembly (3) and the VPODs (6). See Figure 8-42. (Rev. 2005) All information subject to change without notice. 8-48 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION