Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 1. Align the VPODs (4) brackets to the engine block and secure with two bolts (1) and stud (3). See Figure 8-44. Torque the M10 bolt and M10 stud to 58-73 N·m (43-54 lb·ft) and the M8 bolt to 30-38 N·m (22-28 lb·ft). 1. Bolt 3. Stud 2. Sensor Harness 4. VPODs Figure 8-44 VPODs and Related Parts 2. Connect the sensor harness (2) to the VPODs (4). See Figure 8-44. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 8-51