Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.10 GEAR CASE COVER PRE-EXHAUST GAS RECIRCULATION (EGR) 13. There are a total of 34 bolts that secure the gear case cover to the gear case. Bolts 17, 18, 19 and 20 were removed with the front engine mount. Bolts F1 through F5 were removed in a previous step; refer to step 12. Loosen and remove bolts 1 through 16, 21, 22 (see note). Figure 1-160 Gear Case Cover Bolt Arrangement (Front) NOTE: Bolts 21 and 22 are rear bolts on pre-1991 engines. [a] Remove the SRS. Refer to section 2.30.2. (Rev. 2005) All information subject to change without notice. 1-182 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION