1.11 GEAR CASE COVER EXHAUST GAS RECIRCULATION (EGR) MODEL 7. Remove Exhaust Gas Recirulation (EGR) delivery pipe. Refer to section 8.3.1. 8. Remove rocker covers. For one-piece rocker cover refer to section 1.6.2. For two-piece rocker cover refer to section1.6.3. For three-piece rocker cover refer to section 1.6.5. 9. Remove Jake Brake® assemblies. Refer to section 1.36. 10. Remove rocker arm assemblies. Refer to section 1.3.2. 11. Remove Synchronous Reference Sensor (SRS) from camshaft gear assembly cover. Refer to section 2.30. 12. Remove camshaft gear assembly using tool J–46305 . Refer to section1.28. 13. Remove oil pan. Refer to section3.11. 14.
Remove alternator and alternator bracket from gear case cover and gear case. Refer to section 9.2. 15. Remove the crankshaft pulley. Refer to section 1.15. 16. Remove vibration damper and hub. Refer to section 1.14.2. 17. Remove the front engine support by removing the four bolts securing the front engine support to the gear case cover. See Figure 1-179. 1. Front Engine Support 2. Bolt Figure 1-179 Front Engine Support 18. Remove timing pin bracket. (Rev. 2005) All information subject to change without notice. 1-198 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION