SERIES 60 SERVICE MANUAL 1.13 GEAR CASE EXHAUST GAS RECIRCULATION (EGR) MODEL The gear case housing is constructed of cast iron, with machined mating surfaces, and is bolted to the front of the engine cylinder block. The gear case and gear case cover are bolted together to provide a sealed compartment for the engine gear train. See Figure 1-218. 1. Water Pump Drive Gear 5. Air Compressor/Power Steering Pump Drive Gear 2. Bull Gear 6. Crankshaft Timing Gear 3. Adjustable Idler Gear 7. Oil Pump Drive Gear 4.
Gear Case Figure 1-218 Gear Case and Gear Train Assembly The components that are mounted to the gear case include the water pump assembly, (see Figure 1-219), air compressor drive assembly (see Figure 1-220) and the adjustable idler gear assembly. (See Figure 1-221). All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-231