1.13 GEAR CASE EXHAUST GAS RECIRCULATION (EGR) MODEL To determine if repair is possible or replacement is necessary, perform the following procedure. See Figure 1-225. Figure 1-225 Flowchart for Repair or Replacement of Gear Case 1.13.1 Removal of Gear Case EGR Model Perform the following steps to remove gear case: 1. Remove gear case cover. Refer to section1.11.2. 2. Remove Timing Reference Sensor/Crankshaft Position Sensor (TRS/CKP). Refer to section2.32.2. 3. Remove fuel pump. Refer to section2.6. 4. Remove air compressor. Refer to section 11.1.2. 5. Remove water pump from gear case. Refer to section 4.2.2. (Rev. 2005) All information subject to change without notice.
1-236 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION