Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.20 ONE-PIECE PISTON ASSEMBLY AND PISTON RING 1.20 ONE-PIECE PISTON ASSEMBLY AND PISTON RING Series 60 engines with Exhaust Gas Recirulation (EGR) systems built after December 1, 2003 will use a one-piece piston assembly, incorporating the dome and skirt. The new piston reduces friction, improves ring cooling and has a higher compression ratio of 17.25:1 for 12L and 16.75:1 for 14L. NOTE: The one-piece piston assembly is to be used only for On-Highway applications. Ring grooves are machined into the piston assembly. The one-piece piston will not require the use of bushings see Figure 1-283. 1. Fire Ring 4. Retainer 2. Compression Ring 5. Piston Assembly 3. Oil Control Ring with Expander 6.

Piston Pin Figure 1-283 One-Piece Piston Assembly (Rev. 2005) All information subject to change without notice. 1-306 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION