Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.23 CYLINDER LINER NOTICE: The crevice seal prevents coolant from being pumped in and out of the area adjacent to the liner lower block location which could result in cavitation and corrosion damage to the liner and the block. A crevice seal, fitting in the wide uppermost groove in the liner helps to stabilize the liner in the cylinder block bore. This system also keeps any debris that is in the cooling system from causing abrasion damage to the upper "D" liner seal ring. See Figure 1-330.

Figure 1-330 Cylinder Liner Crevice Seal Cross-Section Two teflon-coated, D-shaped seal rings, recessed in the lower two grooves in the cylinder liner, are used between the liner and the block to prevent coolant and oil leakage. See Figure 1-331. Figure 1-331 Cylinder Liner Seal Ring Cross-section (Rev. 2005) All information subject to change without notice. 1-362 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION