Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.25 COMPACT GEAR TRAIN AND ENGINE TIMING 1.25.2 ENGINE TIMING When an engine is out of time, the camshaft timing can be checked by following the camshaft timing check procedure. Refer to section 1.28.6.1. If the engine is out of time, a visual inspection of the gear train is required. Refer to section 1.11.2 and perform all of the steps under "Removal of Gear Case Cover." 1.25.2.1 Check Engine Timing Gear train noise is usually an indication of excessive gear lash, chipped, pitted or burred gear teeth, or excessive bearing wear. Therefore, when noise develops in a gear train, the gear case cover should be removed and the gear train and its bearings inspected.

A rattling noise usually indicates excessive gear lash. A whining noise indicates too little gear lash. 1. Check engine timing as follows: (Rev. 2005) All information subject to change without notice. 1-404 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION