1.26 CAMSHAFT GEAR ASSEMBLY SERIES 60 EXHAUST GAS RECIRCULATION (EGR) MODEL To avoid injury when removing or installing a heavy engine component, ensure the component is properly supported and securely attached to an adequate lifting device to prevent the component from falling. PERSONAL INJURY 12. Lift camshaft and camshaft gear cover assembly from camshaft bearings and gear case. Use lifting tool (J–46305) to assist in lifting camshaft gear cover assembly. See Figure 1-389. 1. Seal 3. Lifting Tool 2. Camshaft Gear Cover 4. Camshaft Figure 1-389 Camshaft Gear Assembly and Lifting Tool 13.
Remove the lower camshaft bearing shells, and group them with the upper shells and caps for possible reuse. 1.26.3 Disassembly of Camshaft Gear Assembly EGR Model Disassemble the camshaft from the camshaft gear as follows. 1. Use suitable fixture to secure the camshaft assembly from movement. (Rev. 2005) All information subject to change without notice. 1-430 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION