SERIES 60 SERVICE MANUAL Turbocharger Compressor Inlet Shield A turbocharger compressor inlet shield, J 26554-A, is available and must be used anytime the engine is operated with the air inlet piping removed. See Figure 15. The shield helps to prevent foreign objects from entering and damaging the turbocharger and will prevent the mechanic from accidentally touching the turbocharger impeller. The use of this shield does NOT preclude any other safety practices contained in this manual. See Figure 16 for Series 60G engine.
PERSONAL INJURY To avoid injury from contact with rotating parts when an engine is operating with the air inlet piping removed, install an air inlet screen shield over the turbocharger air inlet. The shield prevents contact with rotating parts. Use of this shield does NOT preclude any other safety practices contained in this manual. Figure 15 Turbocharger Compressor Inlet Shield (Rev. 2005) All information subject to change without notice. 38 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION