1.32 BULL GEAR AND CAMSHAFT IDLER GEAR FOR THE COMPACT GEAR TRAIN 6. Install bull gear onto spindle and install a new O-ring into spindle. See Figure 1-468. 1. O-ring 3. Spindle 2. Bull Gear Figure 1-468 Bull Gear, Spindle and O-ring Location 7. Install camshaft gear assembly. Refer to section 1.26. 8. Check the timing marks on the bull gear and crankshaft timing gear to ensure gear train is properly timed. See Figure 1-467. 9. Check the lash for all of the gears that mate with the bull gear and camshaft idler gear. Refer to section1.25 . 10. Install the gear case cover. Refer to section 1.11.3. 11. Check bull gear to accessory drive gear lash. Refer to section 1.25.2.1. 12.
Refer to section 12 for verification of proper bull gear and camshaft idler gear assembly installation. (Rev. 2005) All information subject to change without notice. 1-524 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION