SERIES 60 SERVICE MANUAL 1. Solenoid Valve 9. Master Piston Retaining Ring 17. Slave Piston 2. Solenoid Upper Seal Ring 10. Control Valve 18. Slave Piston Bridge 3. Solenoid Center Seal Ring 11. Outer Control Valve Spring 19. Outer Slave Piston Spring 4. Solenoid Lower Seal Ring 12. Inner Control Valve Spring 20. Inner Slave Piston Spring 5. Master Piston 13. Control Valve Cover 21. Spacer Tube 6. Master Piston Pushrod 14. Retaining Ring 22. Shoulder Bolt 7. Master Piston Spring 15. Adjusting Screw* 23. Drive Screw 8. Master Piston Retainer 16. Locknut 24. Wire Harness Clip *Note that Model 790 Jake Brake uses a J-Lash™assembly. Model 795 Jake Brake uses a solid screw.
Figure 1-529 Typical Model 790/795 Jake Brake Assembly NOTICE: This application and adjustment information must be strictly followed. Failure to follow these instructions may result in serious engine or engine brake damage. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-591