SERIES 60 SERVICE MANUAL To avoid injury from flying parts when working with components under spring tension, wear adequate eye protection (face shield or safety goggles). EYE INJURY 1. Push down on the accumulator cover using the appropriate diameter rod, and remove the retaining ring. See Figure 1-536. 1. Jake Brake Assembly 3. Retaining Ring Pliers 2. Retaining Ring Figure 1-536 Removing Retaining Ring 2. Relieve pressure on the accumulator cover. 3. Remove the cover and spring. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-599