1.36 JAKE BRAKE 4. Remove the six capscrews and nut that secure the engine brake housing. See Figure 1-560. 1. Capscrew - 170 mm long 3. Stud Bolt 2. Capscrew - 140 mm long 4. Nut Figure 1-560 Model 790/795 Jake Brake Fasteners 5. Remove the engine brake housing. 6. Repeat steps1 through step 5 to remove the second Jake Brake housing. 7. Retain the six spacer tubes. See Figure 1-559. 1.36.6.1 Disassembly of Model 790/795 Jake Brake Disassemble Model 790/795 Jake Brake as follows: NOTICE: To avoid possible engine damage, do not disassemble or tamper with the solenoid valve. (Rev. 2005) All information subject to change without notice.
1-624 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION