Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

Figure 1-577 Main Journal Oil Hole Chamfer Limits 3. Repair the flywheel and pulley contact faces of the crankshaft to clean up the surface of any nicks, gouges or raised metal. The crankshaft face must be 0.013 mm (0.0005 in.) convex to 0.025 mm (0.001 in.) concave. (Rev. 2005) All information subject to change without notice. 1-656 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION