Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 1. 5109157 Cup Plug (11 places) * 5. 8926991 Fuse Plug. Torque to 19-24 N·m (14-18 lb·ft). 2. 5139991 Cup Plug (2 places) * 6. 8923313 3/4 in. Pipe Plug (2 places). Torque to 45-56 N·m (33-41 lb·ft). 3. 23513197 3/8 in. Pipe Plug (Square Drive) (2 places). Torque to 30-33 N·m (22-24 lb·ft). 7. 8924750 1 in. Pipe Plug (1 place). Torque to 102-127 N·m (75-94 lb·ft). 4. 8923916 1/2 in. Pipe Plug (2 places). Torque to 31-39 N·m (23-29 lb·ft). *Cup plugs 1 and 2 are installed 2.5-3.0 mm (0.098 in. -0.118 in.) below the machined surface. † Use tool set (J–35653) to install the cup plugs.

Coat the outside sealing edge of the cup plugs with a good grade of non-hardening sealant such as Loctite® 620 (or equivalent) before installing. Figure 1-591 Cylinder Head Cup, Pipe Plug, and Dowel Chart All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-669