Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL SPECIFICATIONS Specifications, clearances and wear limits are listed below. It should be specifically noted that the clearances apply only when all new parts are used at the point where the various specifications apply. This also applies to references within the text of the manual. The column entitled "Limits" in this chart lists the amount of wear or increase of clearance which can be tolerated in used engine parts and still ensure satisfactory performance. It should be emphasized that the figures given as "Limits" must be qualified by the judgment of personnel responsible for installing new parts.

These wear limits are, in general, listed only for the parts more frequently replaced in engine overhaul work. For additional information, refer to the text. Specifications, New Clearances, and Wear Limits These limits also apply to oversize and undersize parts. Refer to the following tables to obtain specifications, new clearances, and wear limits for the Series 60 Engine. All information subject to change without notice. (Rev.

2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-671 Component Reference Cylinder block listed in Table 1-16 Cylinder liner listed in Table 1-17 Cross-head piston and piston rings listed in Table 1-18 Articulated 14L piston and piston rings listed in Table 1-19 Cross-head cast-iron piston pin listed in Table 1-20 Articulated 14L piston pin listed in Table 1-21 Crankshaft listed in Table 1-22 Connecting rod bearing listed in Table 1-23 Closed-end connecting rod bushing listed in Table 1-24 Main bearing listed in Table 1-25 Camshaft listed in Table 1-26 Camshaft bearing listed in Table 1-27 Camshaft drive gear listed in Table 1-28 Idler gear listed in Table 1-29 Crankshaft timing gear listed in Table 1-30 Bull gear listed in Table 1-31 Cylinder head listed in Table 1-32 Intake valve (diesel) seat insert listed in Table 1-33 Intake valve (natural gas) seat insert listed in Table 1-34 Exhaust valve (diesel) seat insert listed in Table 1-35 Exhaust valve (natural gas) seat insert listed in Table 1-36