SERIES 60 SERVICE MANUAL The gear teeth vent cavity (7) provides escape for the fuel oil that is squeezed out of the gear teeth as they mesh together on the discharge side of the pump. Otherwise, fuel trapped at the root of the teeth would tend to force the gears apart, resulting in undue wear on the gears, shafts, body, and cover. See Figure 2-45. 2. Dowel Hole 11. Drive Gear 1. Passage to Head of Relief Valve-Pressure Side 10. Dowel 3. Body 12. Drive Shaft Gear 4. Oil Seal Vent to Suction Side 13. Relief Valve 5. Relief Valve Vent to Suction Side 14. Spring 6. Passage to Head of Relief Valve-Suction Side 15. Pin 7. Gear Teeth Vent Cavity 16. O-ring 8. Cover 17. Plug 9. Driven Gear 18.
Spacer Figure 2-45 Fuel Pump All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 2-61