Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

2.7 FUEL PUMP WITH SEPARATE DRIVE SHAFT AND HUB both seals until it contacts the bench. See Figure 2-54. Approximately 3 mm (1/8 in.) of the open end of the protector should remain above the inner seal. Figure 2-54 Seal Protector Installation (Rev. 2005) All information subject to change without notice. 2-72 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION