2.15 DDEC V ELECTRONIC CONTROL UNIT Any faults that occur are stored as codes in the ECU's memory. These codes can be accessed in any of three ways: 1. A DDDL® can be used to read the codes. 2. A personal computer (PC) connected to the ECM through a translator device which converts J1708 to RS232 protocol can be used. 3. The Amber Warning Lamp (AWL) or the Red Stop Lamp (RSL) is illuminated. The AWL (panel mounted yellow indicator light) illuminated diagnose condition as soon as convenient. The RSL (panel mounted red indicator light) and AWL illuminated, a major fault occurred and immediate attention required to avoid engine damage.
Automatic engine shutdown or rampdown is available as an option. A shutdown override switch is required to allow the vehicle to be moved to a safe location during automatic shutdown or rampdown. The Detroit Diesel Diagnostic Link® (DDDL) is a sophisticated PC software package that requests and receives engine data and diagnostic codes. The Detroit Diesel Diagnostic Link® DDDL supports DDEC V and the Series 60 2004 engine. The DDDL functions are: Read and display current calibration for an ECU. Create a calibration for the ECU on an individual engine.
Save a single calibration with an ECU password, this same password can be used for fleet of vehicles with the same password or technician who does not have access to the password. Change the engine rating of a vehicle. Set the injector calibration when you replace the injectors. View an audit trail of ECU and injector calibration changes. The SAE Standard Communications of the DDEC V system are listed in Table 2-6. The fan control inputs and outputs for DDEC V are listed in Table 2-7. The engine brake control features of DDEC V are listed in Table 2-8. DDEC V can identify faulty components and other engine-related problems by providing the technician with a diagnostic code.
Standard sensors are listed in Table 2-9. OEM installed sensors are listed in Table 2-10. SAE Standard Communication SAE J1587 protocol on J1708 hardware Electronic dashes Diagnostics Data Hub SAE J1922 protocol on J1708 hardware Traction control systems Transmission controls SAE J1939 high speed data link Vehicle controls Table 2-6 SAE Standard Communications for DDEC V (Rev. 2005) All information subject to change without notice. 2-136 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION