14 400 Series Wiring diagram - automatic shutdown 55 amp alternator 403C-15, 404C-22 and 404C-22T Automatic shutdown operating conditions If the conditions listed below continues for more than ten seconds while starting, or two seconds while the engine is being operated, the engine will shutdown. If the water temperature exceeds 110 °C (230 °F) ± 3°C (5 °F) If the oil pressure falls below 0,3 kgf / cmІ (4.27 lbf / inІ top cover option) or 1,0 kgf / cmІ (14.22 lbf / inІ oil rail option). Cautions : There is no automatic shutdown for low water levels. Diode capacity: current 3 amps, reverse voltage 600V, this is mandatory . Notes:
Maximum current draw for the standard oil pressure switch is 0.42 amps (5 Watts maximum bulb). A delay fuse can be fitted if necessary. Automatic shutdown D1 device D2 *2 Diode Oil press. Altr. Water temp. Solenoid switch *2 Diode *1 Alternator 11 W Oil Press. switch Thermo switch Glow Plugs B+ B Fuse Ind 65A 80/0.4 (10) B AC 30 17 *3 19 50 Glow signal Starter motor 12V S Key switch Battery K1094/2 114 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green 6 4 5 1 2 3