Perkins — To check and to adjust Operation 3-20

3 400 Series Valve tip clearance To check and to adjust Operation 3-20 The valve adjustment sequence is viewed from the front of the engine. Rotate the crankshaft clockwise when viewed from the front. Caution: Only adjust the valve clearances when the engine is cold. Engine Valve overlap Adjust valves No. 1 Cylinder 3 and 6 403C-11 403C-15 No. 2 Cylinder 2 and 5 No. 3 Cylinder 1 and 4 404C-22 404C-22T No. 4 Cylinder 1 and 2 No. 2 Cylinder 5 and 6 No. 1 Cylinder 7 and 8 No.

3 Cylinder 3 and 4 Valve tip clearance (cold) Exhaust 0,2 mm (0.0078 in) Inlet 0,2 mm (0.0078 in) Torque Nm (lbf ft) kgf m Tappet adjustment nut 14 (10.3) 1,4 H1053 32 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green