4 400 Series To measure the piston ring gap Operation 4-6 If the piston ring is worn or damaged, renew. Piston ring gap Clean the carbon from the top of the cylinder bore. Insert the ring into the cylinder at right angles to the cylinder block and measure the gap with a feeler gauge. If the gap is greater than the service limit, renew the piston ring. H1059 38 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential:
Green Engine Ring numbe r Standard Service limit 403C11 Number 1 ring Number 2 ring Oil control ring 0,15 - 0,27 mm (0.0059 - 0.0106 in) 1,0 mm (0.039 in) 0,12 - 0,24 mm (0.0047 - 0.0094 in) 1,0 mm (0.039 in) 0,20 - 0,35 mm (0.0079 - 0.0138 in) 1,0 mm (0.039 in) 403C-15 404C-22 404C-22T Number 1 ring Number 2 ring Oil control ring 0,20 - 0,35 mm (0.0079 - 0.0138 in) 1,0 mm (0.039 in) 0,20 - 0,40 mm (0.0079 - 0.0158 in) 1,0 mm (0.039 in) 0,20 - 0,40 mm (0.0079 - 0.0158 in) 1,0 mm (0.039 in)