400 Series 6 Timing case and drive assembly 6 Timing cover To remove Operation 6-1 403C-11 Cautions : If the timing case assembly or internal governor components are replaced the fuel adjustment screw should not be adjusted. The maximum no load speed should be checked after assembly. The fuel injection pump, see Operation 11-3 and the keyway in the crankshaft must be removed before the timing case is removed. Ensure that the stop lever arm (1) is held clockwise in tension for removal and assembly. Note: If the timing case is renewed, a new emission label must be fitted as shown (2). 1 To remove the PTO cover, see Operation 6-9. 2 To remove and to fit the crankshaft pulley, see Operation 5-1.
1 2 3 H1068 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green 51 ngine Sp Descriptio ecial tools n Part number Front oil seal protector 21825620 -22 and 404C-22T Front oil seal protector 21825621