Perkins — To remove and to fit Operation 6-5

400 Series 6 Camshaft retaining plate To remove and to fit Operation 6-5 The camshaft retainer plate is fitted between the cylinder block and the camshaft gear. The camshaft retainer plate is fastened by either two setscrews or a setscrew and an allen screw. Note: If the camshaft assembly is replaced the fuel adjustment screw must not be altered from the original setting. The maximum no load speed must be checked after assembly. H1072 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green 55 Engine Torque Nm (lbf ft) kgf m All models Camshaft retainer plate setscrews 11 (8) 1,1