Perkins — To remove and to fit Operation 6-6

6 400 Series Camshaft and tappets To remove and to fit Operation 6-6 Caution: Remove the lift pump see Operation 11-2 and the fuel injection pump see Operation 11-3 before removing the camshaft. Note: If the camshaft assembly is replaced the fuel adjustment screw must not be altered from the original setting. The maximum no load speed must be checked after assembly. Lubricate the tappets with clean lubricating oil before assembly. 1 H1073 56 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green