Perkins — To remove and to fit Operation 7-1

400 Series 7 Cylinder block assembly 7 Front crankshaft bush To remove and to fit Operation 7-1 Caution: Ensure that the lubrication oil hole in the bush, aligns with the oil gallery in the block. To remove the bush use a suitable drift and hammer from the inside of the block. Use a suitable press to fit the crankshaft bush. Note: The bush must be fitted with the chamfered side (2) towards the cylinder block, with the join (1) at the top. 1 2 H1082/1 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green 65