Perkins — To inspect Operation 7-2

7 400 Series To inspect Operation 7-2 1 Check the bush for damage, wear and contact. If damaged, worn or poor contact renew the bush. 2 Using a cylinder gauge and a micrometer, measure the bush (A) and the crankshaft journal (B) to calculate the clearance. 3 Measure the inside diameters at positions (A1) and (A2) at each position measure in both directions (A3) and (A4) as shown. The oil clearance is the difference between the larger value and the maximum crankshaft journal diameter. Service limit 0,20 mm (0.0078 in) 0,20 mm (0.0078 in) 4 If the oil clearance exceeds the service limit, renew the bush, or regrind the crankshaft journal and use an undersize bush.

Crankshaft journal O.D finished size 47,964 - 47,975 mm (1.88830 - 1.88880 in) 47,714 - 47,725 mm (1.87850 - 1.87890 in) 47,464 - 47,475 mm (1.86870 - 1.86910 in) 67,957 - 67,970 mm (2.67550 - 2.67597 in) 67,707 - 67,720 mm (2.66563 - 2.66614 in) 67,457 - 67,470 mm (2.65579 - 2.65630 in) 66 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green Engine Standard oil clearance 403C-11 0,039 - 0,106 mm (0.00150 - 0.00420 in) 403C-15 404C-22 404C-22T 0,044 - 0,116 mm (0.00173 - 0.00456 in) Bush size 403C-11 Standard 0,25 mm (0.01 in) 0,50 mm (0.02 in) 403C-15 404C-22 404C-22T Standard 0,25 mm (0.01 in) 0,50 mm (0.02 in) H1083