400 Series 7 Cylinder block top face To inspect Operation 7-3 Inspect the cylinder block top face for cracks, damage and warping in the same way as for the cylinder head, see Operation 3-16. If outside service limit, renew the cylinder block. Caution: The fuel adjustment screw must be set by an approved Perkins dealer to ensure that the engine will comply with emissions legislation. If the cylinder block is renewed, the engine must be tested on an engine test brake and the fuel adjustment screw set. If a suitable engine test brake is not available, a long engine is available as a service part.
Service limit 0,12 mm (0.005 in) 1 3 4 5 6 2 H1084 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green 67 Engine Standard value S All models Less than 0,05 mm (0.002 in) 0,12