Perkins — To check the timing of the fuel injection pump Operation 8-2

8 400 Series To check the timing of the fuel injection pump Operation 8-2 Engine Special tools Part number 1 Set the piston for number one cylinder to TDC on the compression stroke. Turn the crankshaft counter clockwise a quarter of a revolution. All models Spill pipe 21825680 2 Remove the ESOS, high pressure fuel pipes and low pressure fuel pipes from the fuel injection pump. 3 Ensure that the fuel pump rack is in the maximum fuel position. 4 Remove the delivery valve holder for number 1 cylinder and remove the delivery valve. Store the delivery valve in clean fuel until assembly. Note: The fuel pump may have to be removed to an upright position to remove and to fit the delivery valves.

5 Connect the fuel pump spill pipe (1) to the delivery valve holder for number 1 cylinder. Continued 70 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green 1 H1086 H1086