ENGINE MAINTENANCE - Maintenance Procedures Nitrite level Carboxylate level NOTE NOTE 2 Test the engine coolant at least twice per year to determine if the coolant must be replaced. If it is determined that the coolant should be replaced, make sure to flush the coolant system. Contact a PACCAR® Authorized Re- pair Location for flushing the coolant system. Checking Coolant Condition Inhibitor concentration level de- termines corrosion protection. If you are concerned about possi- ble coolant quality, contamina- tion, or mechanical problems, submit a coolant sample to your dealer for analysis.
Improper maintenance may cause coolant degradation and could result in damage to the cooling system and engine components. Consult your dealer or the coolant manu- facturer's representative for rec- ommended extended life coolant test kits, test strips, and laborato- ry sample procedures. Recommended coolant checks. To ensure the Extended Life Coolant (ELC) in your vehicle always provides maximum protection, perform the following tests: 1. Check the coolant color at every maintenance interval. It should have no cloudiness, floating debris, or oils. 2. Test the freeze point at least twice a year. A refractometer or test strips can be used to measure the protection level. 3.
Determine the pH and chemical inhibitor concentration level by using an ELC-specific test kit or test strips. 4. Keep the cooling system full by topping-up using ELC pre-diluted to a 50/50 blend, unless a different ratio of water/antifreeze has been substituted (depending on operating conditions). Service interval is every oil change or 15,000 mi (24,000 km), 500 hours, or 6 months, whichever occurs first. A heavy- duty, year-round antifreeze that meets the chemical composition of GM6038M must be used. The change interval is 2 years or 240,000 mi (385,000 km), whichever occurs first. Antifreeze is essential for freeze and corrosion protection.
Supplemental coolant additives are essential for liner pitting and scaling protection. Radiator Hoses Maintenance checks for radiator hoses. 1. Check the following anti-freeze conditions: Perform these maintenance procedures according to the Preventative Maintenance Schedule. Coolant level Freeze point pH level 1. Check the following radiator hose conditions: 64 Y53-1185-1E1 (04/16/18)