13. TRANSPORTATION 13.2 PRECAUTIONS FOR LOADING After loading to the specified position, secure the machine as follows. Lower the blade slowly. Lock all the control levers securely with the safety lever. Set the parking lever to the LOCK position. Push fuel control lever in the engine stop position and stop the engine. Turn the starting switch to the OFF position, stop the engine, then remove the key. 5. Lock the cab door, left and right engine side covers, and the battery inspection cover. 6. Put blocks under the front and rear of both tracks and secure the machine in position with chains or wire rope of appropriate strength to prevent the machine from moving during transpor- tation.
Be particularly careful to tie the machine down securely so that it does not slip to the side. 13.3 LIFTING POSITION Set the lifting position for the machine as shown in the diagram on the right. Stop the engine and be sure to set the parking lever to the LOCK position. AEl05740 2-76