24. SERVICE PROCEDURE CLEAN AIR CONDITIONER AIR FILTER If the air conditioner air filter is clogged or there is dirt or dust in it, clean the filter. 1. Open inspection cover, push up clip 0, then remove FRESH filter 0. 2. Remove the bolt @ at the left side of operator’s seat, then remove RECIRC filter @. 3. Clean filters @ and @ with compressed air. If there is oil stuck to the filter, or it is extremely dirty, wash it in a neutral agent. After washing it, dry it completely before installing it again. REMARK If the clogging of the filter cannot be removed by washing or using compressed air, replace the filter with a new part.
24.2.11 CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID If there is air in the window washer fluid, check the level and add fluid. Open the engine R.H. side cover, check the level of the fluid in window washer tank 0, and if it is low, add automobile window washer fluid. When adding fluid, be careful not to let dirt or dust get in. 3-35