Komatsu — 24.7 EVERY 2000 HOURS SERVICE

24.7.2 CHANGE OIL IN FINAL DRIVE CASE The oil is at high temperature immediately after the machine Prepare the following. w AL116731 l Container to catch drained oil: Min. 40 .Q capacity l Refill capacity: each 40 e (10.56 US gal, 8.8 UK gal) 1. Remove oil filler plug 0, then remove drain plugs @, and drain the oil. Remove all the mud and dirt from around oil filler plug 0 before removing it. Be careful not to let any dirt or sand get in when adding oil. 2. After draining the oil, tighten the drain plug 8. 3. Remove oil filler plug (ij, and refill the engine oil until oil overflow from filler hole @, and tighten the plugs. For details of the oil to use, see “20.

USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. 3-59