Komatsu — 24.7 EVERY 2000 HOURS SERVICE

24. SERVICE PROCEDURE 24.7.3 CHANGE OIL IN DAMPER CASE, CLEAN AIR HOLE AND BREATHER 7 g WARNING -1 The oil is at high temperature immediately after the machine has been operated. Wait for the oil to cool down before carrying out maintenance. Container to catch drained oil: Min. 2.1 e capacity Refill capacity 2.1 I? (0.55 US gal, 0.46 UK gal) Remove breather @ at the top of the damper. Wash out dust remaining inside of breather with diesel oil and flushing oil. 3. Install breather @ to the original position. 4. Remove air hole plate @ (4 places) from the top of the damper 5. Remove any dirt or dust, then wash it in clean diesel oil or flushing oil. 6. Open cover at the bottom of the machine.

7. Remove drain plug @ slowly to avoid getting oil on yourself, and drain the oil. After draining the oil, tighten plug 0. 8. Pull out dipstick 0, and add engine oil to the specified level through oil filler. For deteils of the oil to use, see “20. USE OF FUEL, COOLANT, LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. 9. Check that the oil level is between the H and L marks on dipstick 0. For details, see “24.3 CHECK BEFORE STARTING”. 10. Close the inspection cover. 3-60